Student Login
Course Content
The Drone Rules, 2021
Drone Rules 2021: Drone Rules 2021 are simplified regulations by the Indian government to promote safe and legal use of drones. They reduce paperwork, lower fees, and encourage drone innovation. The rules classify drones, define flying zones, require registration, and mandate pilot licenses for larger drones while easing restrictions on smaller, non-commercial drones. G.S.R. 589(E).—Whereas, the draft of the Drone Rules, 2021, which the Central Government had proposed to make in supersession of the Unmanned Aircraft System Rules, 2021, were published, as required under section 14 of the Aircraft Act, 1934 (22 of 1934), vide notification of the Government of India in the Ministry of Civil Aviation number G.S.R. 489 (E), dated the 15th July, 2021 in the Gazette of India, Extraordinary, Part II, Section 3, Sub-section (i), dated the 15th July, 2021, inviting objections and suggestions from all persons likely to be affected thereby, before the specified period;  And whereas, the objections and suggestions received in respect of the draft rules within the period so specified have been taken into consideration;  Now, therefore, in exercise of the powers conferred by section 5, sub-section (2) of section 10 and sections 10A, 10B and 12A of the Aircraft Act, 1934 (22 of 1934), the Central Government hereby makes the following rules, namely:– 
0/16
 PART I  ( PRELIMINARY )
PART II  (CLASSIFICATION OF UNMANNED AIRCRAFT SYSTEM)
PART III (CERTIFICATION OF UNMANNED AIRCRAFT SYSTEM)
PART IV  (REGISTRATION OF UNMANNED AIRCRAFT SYSTEM)
PART V  (OPERATION OF UNMANNED AIRCRAFT SYSTEM)
PART VI ( REMOTE PILOT LICENCE)
PART VII  (REMOTE PILOT TRAINING ORGANISATION)
PART VIII (RESEARCH, DEVELOPMENT AND TESTING)
PART IX   (UNMANNED AIRCRAFT SYSTEM TRAFFIC MANAGEMENT)
PART X  (INSURANCE)
PART XI (UNMANNED AIRCRAFT SYSTEM PROMOTION)
PART XII   (MISCELLANEOUS)
FORM D-1,D-2,D-3,D-4,D-5
Drone (Amendment) Rules, 2022
Assignment (Drone Rules, 2021)
What is the short title of the rules governing drones in India?
00:15:00
2.BASIC PRINCIPLES OF FLIGHT
0/3
FUNDAMENTALS OF FLIGHT?
MCQ QUIZ
00:02:00
ASSIGNMENT QUESTIONS
3. ATC PROCEDURES AND RADIO TELEPHONY
0/1
Air Traffic Control (ATC)
4.FIXED-WING, ROTORCRAFT & HYBRID OPERATIONS AND AERODYNAMICS
FIXED-WING OPERATIONS AND AERODYNAMICS: A fixed-wing drone is a type of unmanned aircraft that has rigid wings and flies like an airplane. • Wings: Fixed-wing drones feature one or more wings, which are the main lifting surfaces. Wings generate aerodynamic lift, allowing the drone to stay airborne. They can be configured as monoplanes (single wing) or biplanes (two wings) depending on the design requirements. • Fuselage: The fuselage is the main body of the drone. It houses critical components such as the payload, control systems, and propulsion unit. The fuselage provides structural integrity and contributes to the overall aerodynamic shape of the drone. • Empennage: The empennage refers to the tail section of the drone, comprising the horizontal stabilizer and the vertical stabilizer. The horizontal stabilizer helps control the drone's pitch (rotation around the lateral axis), while the vertical stabilizer aids in controlling the drone's yaw (rotation around the vertical axis). Fix wing Control Surfaces • Ailerons: - Ailerons are hinged flight control surfaces on the trailing edge of an aircraft’s wings that control the aircraft’s roll, or movement around its longitudinal axis: • Elevator: - An Aircraft elevator is a flight control surface that controls an aircraft’s pitch, or lateral axis movement • Rudder: - The Rudder is a movable surface on an aircraft that controls the yaw, or rotation, of the plane around its vertical axis. It’s usually attached to the vertical stabilizer, or fin, at the rear of the aircraft. Advantages of fix wing Drone: ✅ 1. Longer Flight Time • Fixed-wing drones are much more energy-efficient than multi-rotors. • They glide using lift from their wings, which reduces power consumption. • Typical flight time: 1–2 hours or more (compared to 20–30 minutes for most multi-rotors). ✅ 2. Greater Range • Due to their fuel efficiency, fixed-wing drones can cover longer distances. • Ideal for mapping, surveying, and monitoring large areas like farms, forests, or pipelines. ✅ 3. Higher Speeds • They can fly faster than rotary drones. • Useful for time-sensitive missions such as search and rescue or disaster assessment. ✅ 4. Higher Payload Efficiency (in some designs) • Fixed-wing drones can be designed to carry sensors, cameras, or other equipment over longer distances efficiently. ________________________________________ ✅ 6. Professional Use Applications • Widely used in industries such as: o Agriculture (crop monitoring, spraying) o Surveying and mapping o Environmental monitoring o Military and defense o Disaster response Disadvantages of fix wing Drone: • Takeoff and Landing: Fixed-wing drones require a suitable runway or launching mechanism for takeoff and landing, limiting their ability to operate in confined spaces or areas with limited infrastructure. • Limited Hovering Capability: Unlike multirotor drones, fixed-wing drones cannot hover in one place. This limits their ability to perform tasks that require stationary or slow-speed operations. • Complex Operation: Flying fixed-wing drones requires more advanced piloting skills and knowledge of aerodynamics compared to operating multirotor drones. Hybrid Operations and Aerodynamics HYBRID (VTOL) : - Hybrid fixed-wing VTOL drones are designed with the capability to vertically take off and land, combining the benefits of both fixed-wing and multirotor aircraft. This greatly reduces the risk of damage to the airframe during the landing process. Fly at higher altitude. 1. VTOL Stage: -  Thrust-to-weight ratio is crucial for vertical takeoff and landing (VTOL) capabilities.  Aerodynamic lift is supplemented by thrust generated by rotors or other vertical propulsion systems.  Control surfaces such as rotors or thrust vectoring mechanisms provide stability and maneuverability during hover.  Efficient use of energy during vertical flight is critical to maximize endurance and payload capacity. 2. Fixed Wing Stage:  Aerodynamic lift generated primarily by the wings, requiring forward airspeed for sustained flight.  Wings provide lift-to-drag ratio optimization for efficient cruise flight.  Control surfaces such as ailerons, elevators, and rudders manage the aircraft's attitude and direction.  Stability augmentation systems may be employed to enhance stability during fixed-wing flights. Comparison with Rotorcraft and Aeroplane: Application of Hybrid UAVs: Hybrid drones have a wide range of applications across various industries, including: 1. Aerial Photography and Videography: Capture stunning footage and images for film, real estate, construction, and tourism. 2. Inspection and Monitoring: Oil and gas pipelines, power lines, wind turbines, and critical infrastructure. 3. Search and Rescue: Locate missing persons, survey disaster areas, and deliver emergency supplies. 4. Agriculture: Crop monitoring, soil analysis, precision farming, and livestock tracking. 5. Environmental Conservation: Wildlife tracking, forest monitoring, and pollution detection. 6. Construction and Surveying: Site mapping, 3D modeling, and progress tracking. 7. Disaster Response: Damage assessment, debris removal planning, and emergency communication. 8. Medical Supply Delivery: Transport vaccines, blood, and medical equipment to remote areas. 9. Mining and Exploration: Geological surveying, mineral detection, and site monitoring. 10. Scientific Research: Atmospheric sampling, weather monitoring, and climate studies. 11. Military and Defense: Surveillance, reconnaissance, and communication relay. 12. Infrastructure Maintenance: Bridge inspection, road monitoring, and utility maintenance. 13. Forestry Management: Tree counting, health monitoring, and fire detection. 14. Oil and Gas Exploration: Offshore platform inspection and pipeline monitoring. 15. Emergency Services: Firefighting support, police surveillance, and accident investigation. Hybrid drones Advantages: • Longer flight times • Increased payload capacity • Improved stability • Enhanced maneuverability • Reduced noise. • Vertical take-off capability Rotorcraft Rotorcraft drones, also known as rotary-wing drones or multicopters, are unmanned aerial vehicles (UAVs) that utilize rotating blades for lift and propulsion. Unlike fixed-wing drones, rotorcraft drones can hover in place, maneuver vertically, and perform agile flight maneuvers. Understanding the basic terminology and parts of rotorcraft drones is essential for comprehending their operations and aerodynamics. Terminology on based of Rotor used: Tricopter, Quadcopter, Hexacoper, Octacopter. Thrust Upwards- To make the drone go vertically upwards, the speed of all the propellers increases which causes a increase in thrust & hence in lift. When the lift becomes higher than the weight of the drone, it moves vertically upwards. Thrust Downwards- To make the drone go vertically downwards, the speed of all the propellers decreases which causes a decrease in thrust & hence in lift. When the lift becomes lesser than the weight of the drone, it moves vertically downwards. Pitch Forward- To go forward, the speed of the propellers on the rear end increases while the speed of other two remains unchanged. This causes an increase in the lift on the rear end, causing it to go upwards, hence making the front tilt downwards, and moving the drone in forward direction. Pitch Backwards- To go backward, the speed of the propellers on the front end increases while the speed of other two remains unchanged. This causes an increase in the lift on the front end, causing it to go upwards, hence making the back tilt downwards, and moving the drone in backward direction. Yaw- Yaw refers to the direction the front of your drone is facing when rotating either left or right (or clockwise or counter clockwise) around its vertical axis. Drone Anatomy,Different parts of Drones: OTHER TERMINOLOGY: • RTF: Return to Fly • RTH: Return to Home • VLOS: Visual line of sight • Lipo: Lithium Polymer • Payload Autonomous Flight • FPV: First Person View • CW: Clockwise • CCW: Counter Clockwise • GCS: Ground Control Station • RPA: Remotely Piloted Aircraft How to measure Multirotor size: The frame size of a Multirotor is the distance from opposite corner motors. So, if you measure from the front left motor to the back right motor, that distance (in millimeters) is the frame size. Pros and cons Multirotor Drone: Pros: - • Low Prise • High Accessibility • Great manoeuvrability • Ease of use • Vertical Take-off Landing (VTOL) • Good camera control Cons: - • Short Flight Time • Small Pay Capacity • Low Stability in the wind Weather and Meteorology Weather: - Weather is the state of atmosphere, describing for example the degree to which it is hot or cold, wet or dry, calm or stormy, clear or cloudy. On Earth, most weather phenomena occur in the lowest layer of the planet’s atmosphere. Atmosphere: - All weather occurs within the atmosphere, and meteorology is the study of this weather. The water cycle is the reason we have different weather phenomenon, most of the water vapor is trapped in the troposphere. International Standard Atmosphere (ISA):- The ISA is based on the following values of pressure, density, and temperature at mean sea level each of which decrease with increase in height. • Pressure of 1013.25 millibar- Pressure is taken to fall at about 1 millibar per 30 feet in the lower atmosphere (up to about 5,000 feet). • Temperature of +150C – Temperature falls at a rate of 20C per 1,000 feet until the tropopause is reached at 36,000 feet above which the temperature is assumed to be constant at -570C. (The precise number are 1.980C, -570C and 36,090 feet) • Density of 1,225 gm. /m3. Types of Pressure • QFE- The pressure at the surface of the airfield • QNH- Pressure at surface of the airfield reduced to Mean Sea Level under ISA conditions • QNE- The standard pressure setting = 1013.25hPa Devices used to measure Air Pressure-There are three ways that atmospheric pressure is measured- using a mercurial barometer, an aneroid barometer or a barograph. • A Mercurial barometer has a section of mercury exposed, on which the atmosphere pushes down. • If there is an increase in pressure, it forces the mercury to rise inside the glass tube and a higher measurement is shown. If atmosphere pressure lessens, downward force on the mercury lessens and height of the mercury inside the tube lowers. A lower measurement would be shown Relationship between height and temperature: • As height above ground increases, the temperature reduces at a rate of about 20/1000ft (11km) – Tropopause.  Effect of temperature on performance • A higher temperature means lower density, hence lift produced will be less, and efficiency is lesser. • A lower temperature means higher density, hence lift produced will be more, and efficiency is more.  Cold temperature: more air, more lift  Hot temperature: less air, less lift MEASUREMENT OF WIND ANEMOMETER & WIND SHOCK: - • ANEMOMETER: - • It is a device that is used to find the wind speed. • It is analog as well as digital. • Analog Anemometer are fixed while Digital Anemometer are pocket sized and compatible. • Digital hand-held anemometers are available in market which a drone pilot must always carry with them to cross check wind speed at the time of operation. • The Wind speed should not be more than the permitted limits by manufacturer at the time of Drone Operations. METAR: • The letters METAR stand for METeorological Aerodrome Report. • METAR gives us the required data such as wind direction, wind speed etc. needed for safe flying. For drone operation we need to cross check the METAR for safe and secure operations, where we don't risk the drone. • There are several mobile apps that provide real time METAR data. Some of them are mentioned below. • UAV Forecast • Good To Fly • Drone Buddy • AirData UAV • Tropogo WEATHER IMPACT ON UAS OPERATION: WEATHER HAZARD Visibility <3 miles IMPACT ON UAS VLOS impact Fog, cloud and perception Airframe load, short circuiting of electronics, VLOS impacts Icing Critical performance, short circuiting of electronics and safety issue, loss of aircraft Lightning Dropped communication due to radio frequency interference Wind/Wind shear Loss of control, inability to return to home, mission failure Moderate or greater turbulence Reduce Mission duration
Weather and Meteorology
Weather: - Weather is the state of atmosphere, describing for example the degree to which it is hot or cold, wet or dry, calm or stormy, clear or cloudy. On Earth, most weather phenomena occur in the lowest layer of the planet’s atmosphere. Atmosphere: - All weather occurs within the atmosphere, and meteorology is the study of this weather. The water cycle is the reason we have different weather phenomenon, most of the water vapor is trapped in the troposphere. International Standard Atmosphere (ISA):- The ISA is based on the following values of pressure, density, and temperature at mean sea level each of which decrease with increase in height. • Pressure of 1013.25 millibar- Pressure is taken to fall at about 1 millibar per 30 feet in the lower atmosphere (up to about 5,000 feet). • Temperature of +150C – Temperature falls at a rate of 20C per 1,000 feet until the tropopause is reached at 36,000 feet above which the temperature is assumed to be constant at -570C. (The precise number are 1.980C, -570C and 36,090 feet) • Density of 1,225 gm. /m3. Types of Pressure • QFE- The pressure at the surface of the airfield • QNH- Pressure at surface of the airfield reduced to Mean Sea Level under ISA conditions • QNE- The standard pressure setting = 1013.25hPa Devices used to measure Air Pressure-There are three ways that atmospheric pressure is measured- using a mercurial barometer, an aneroid barometer or a barograph. • A Mercurial barometer has a section of mercury exposed, on which the atmosphere pushes down. • If there is an increase in pressure, it forces the mercury to rise inside the glass tube and a higher measurement is shown. If atmosphere pressure lessens, downward force on the mercury lessens and height of the mercury inside the tube lowers. A lower measurement would be shown Relationship between height and temperature: • As height above ground increases, the temperature reduces at a rate of about 20/1000ft (11km) – Tropopause.  Effect of temperature on performance • A higher temperature means lower density, hence lift produced will be less, and efficiency is lesser. • A lower temperature means higher density, hence lift produced will be more, and efficiency is more.  Cold temperature: more air, more lift  Hot temperature: less air, less lift MEASUREMENT OF WIND ANEMOMETER & WIND SHOCK: - • ANEMOMETER: - • It is a device that is used to find the wind speed. • It is analog as well as digital. • Analog Anemometer are fixed while Digital Anemometer are pocket sized and compatible. • Digital hand-held anemometers are available in market which a drone pilot must always carry with them to cross check wind speed at the time of operation. • The Wind speed should not be more than the permitted limits by manufacturer at the time of Drone Operations. METAR: • The letters METAR stand for METeorological Aerodrome Report. • METAR gives us the required data such as wind direction, wind speed etc. needed for safe flying. For drone operation we need to cross check the METAR for safe and secure operations, where we don't risk the drone. • There are several mobile apps that provide real time METAR data. Some of them are mentioned below. • UAV Forecast • Good To Fly • Drone Buddy • AirData UAV • Tropogo WEATHER IMPACT ON UAS OPERATION: WEATHER HAZARD Visibility <3 miles IMPACT ON UAS VLOS impact Fog, cloud and perception Airframe load, short circuiting of electronics, VLOS impacts Icing Critical performance, short circuiting of electronics and safety issue, loss of aircraft Lightning Dropped communication due to radio frequency interference Wind/Wind shear Loss of control, inability to return to home, mission failure Moderate or greater turbulence Reduce Mission duration
6. Drone Assembling&Maintenance
Overview of Drone Components:  Frame,  Motors (BLDC)  Propellers  Electronic Speed Controllers  Flight Controller  Landing Gears  Battery  GPS Module (optional)  Transmitter and Receiver  Gimbals (optional) I. Preparing the Frame:  Materials Used for Frame: Carbon fib, plastic, aluminium.  Frame Setup: Select a frame size based on the drone type (e.g., quadcopter, hexacopter).  Attach landing gear and mounting points for other components. Specification of Frame: Frame Size (Wheelbase in mm)  Measured diagonally(motor-to-motor).  Micro Drones:75mm -150mm (Tiny Whoop, Cin Whoop).  Mini Drones:150mm -250mm (FPV racing, freestyle).  Standard Drones:250mm -450mm (Camera drones, mapping).  Large Drones:450mm -1000mm (Agriculture, heavy lift). Frame Material  Carbon Fiber–Strong, lightweight, vibration resistant (Best for FPV & racing).  Plastic / ABS–Cheap, lightweight (Used in toy drones).  Aluminium / Metal–Durable but heavier (Used in industrial drones).  Composite (G10 / Fiberglass)–Decent strength but heavier than carbon fiber. Frame Types (Based on Arm Configuration)  X-Frame–Balanced for freestyle drones.  True X-Frame–Equal-length arms, best for racing.  H-Frame–Wider body, stable, good for aerial photography.  Stretch X-Frame–Longer for better cornering in racing drones. II. Installing the Motors: • Motor Placement: Attach BLDC motors to the frame at the appropriate positions (each corner for a quadcopter). • Wiring: Ensure wires are routed properly and not exposed to damage. • Orientation: Ensure motors are oriented correctly for proper flight control (clockwise or counterclockwise). III. Specification of Motor: Motor Type • Brushed Motors – Lightweight, used in toy drones. • Brushless Motors (BLDC) – More efficient, powerful, and durable (used in FPV, racing, and professional drones). Motor Size (e.g., 2207, 1806, 2814) • Format: XXYY (e.g., 2207) • XX = Stator Diameter (mm) – Bigger = More torque. • YY = Stator Height (mm) – Taller = More power & efficiency. • Common Sizes for Different Drones: • 1103 - 1404 – Micro drones (TinyWhoop, Cinewhoop). • 1806 - 2207 – FPV racing & freestyle drones. • 2812 - 3115 – Camera drones (DJI, mapping drones). • 3508 - 5010 – Heavy-lift & industrial drones. KV Rating (Motor Speed) • KV = RPM per Volt • Low KV (2300KV) – For racing drones (fast, aggressive flight). Voltage & Battery Compatibility • 2S (7.4V) - 6S (22.2V) commonly used. • Higher voltage = More power & efficiency. • Check if the motor supports LiPo 3S, 4S, 6S, etc. Propeller Compatibility • Small Motors (1103-1404) – 2-3" props. • Medium Motors (2207-2306) – 4-6" props. • Large Motors (2812-5010) – 7-15" props. IV. Mounting the ESCs : • ESCs Role: Control motor speed and direction. • Mounting ESCs: Secure ESCs to the frame, ideally near the motors. • Wiring: Connect ESCs to motors, ensuring correct polarity and wire routing. Current Rating: Choose an ESC with a current rating higher than the motor’s max draw. Common ESC Ratings: • 10A - 20A → Micro drones (2-3 inch). • 20A - 35A → FPV racing/freestyle drones (4-5 inch). • 35A - 60A → Long-range & cinematic drones (5-7 inch). • 60A+ → Heavy-lift drones (8+ inch props). V. Installing the Flight Controller: •Positioning: Mount the flight controller in the centre of the frame for balanced flight. •Wiring: Connect the flight controller to ESCs, receiver, and other essential components (e.g., GPS). •Calibration: Some flight controllers require an initial calibration. VI. Wiring the Battery: • Power Distribution: Attach the battery to the frame, making sure it's securely fastened. • Power Connections: Connect the battery to the power distribution board (if used) and ESCs. • Voltage & Current Checks: Ensure that battery voltage is compatible with the ESCs and flight controller: Adding the Propellers: •Propeller Type: Choose the right size and material based on the drone's weight and motor capacity. •Attachment: Securely attach propellers to the motors using propeller nuts. •Balance: Ensure propellers are balanced for smooth flight and to avoid vibrations. Specifications Propeller’s: Material Types: • Plastic (Affordable, lightweight, but less durable) • Carbon Fiber (Stronger, more rigid, reduces vibrations, but more expensive) • Nylon & Composite Materials (A balance between plastic and carbon fiber) Propeller Sizes: • Measured in inches, typically as diameter ×pitch (e.g., 10x4.5 means 10-inch diameter, 4.5-inch pitch). • Smaller Propellers (3–6 inches): Found in racing drones, fast response, less thrust. • Larger Propellers (10 inches or more): Found in aerial photography drones, more thrust, efficient flight. Pitch (Blade Angle): • Low pitch= Slower speed, better stability, longer flight time. • High pitch= More thrust, higher speed, but drains battery faster. Number of Blades: • Two-blade (Most efficient, less drag, better speed) • Three-blade (More stability, better grip in the air, slightly less efficient) • Four-blade (or more) (More lift, more stability, used in heavy lift drones) • loosening during flight) Rotation Direction: • Clockwise (CW) and Counterclockwise (CCW) pairs to maintain stability. • Incorrect installation can cause drones to flip or not take off properly. Installing the GPS and Receiver: GPS Module: Mount it on top of the frame for clear satellite signals. • Receiver: Mount the receiver and connect it to the flight controller for remote control communication. • Antenna Placement: Ensure antennas have a clear line of sight for proper communication. Ready To Fly Maintenance: comprehensive guide to agricultural drone maintenance, specifically for spraying drones used for fertilizers, herbicides, and pesticides: 1. Types of Maintenance Drone maintenance can be divided into three levels: Type Frequency Purpose Pre-Flight Maintenance Before every flight Safety & readiness Post-Flight Maintenance After every flight Cleaning & data logging Periodic / Preventive Maintenance Weekly, monthly, or after a set number of hours Component health & longevity ________________________________________ ✈️ 2. Pre-Flight Maintenance Checklist Before every spraying operation: 1. Visual Inspection o Check for cracks or damage in arms, frame, propellers, and landing gear. o Tighten all screws and joints (vibration can loosen them). 2. Battery Check o Verify voltage and charge level of flight and pump batteries. o Ensure no swelling or leakage. 3. Spraying System o Check liquid tank for leaks or cracks. o Ensure filters, nozzles, and pipes are clean and free of blockages. o Confirm pump priming and pressure are correct. 4. Propellers & Motors o Check propeller condition (no chips or bends). o Spin motors by hand — they should rotate smoothly. 5. Flight Controller & Sensors o Calibrate compass and IMU if the drone has been transported far. o Ensure GPS connection and RTK (if available) are working. 6. Remote Controller o Check signal strength, firmware updates, and connection to base station/app. ________________________________________ 🧽 3. Post-Flight Maintenance Checklist After each spraying session: 1. Rinse the Spraying System o Empty the tank and rinse it with clean water. o Run clean water through the pump and nozzles to remove chemical residue. o Prevent corrosion and clogging. 2. Clean the Drone o Wipe the frame, arms, motors, and propellers with a damp cloth. o Avoid water near electronics or ESCs (Electronic Speed Controllers). 3. Battery Care o Let batteries cool before recharging. o Store batteries at 50–60% charge if not used for more than 48 hours. o Avoid high temperatures (> 40 °C). 4. Data & Logs o Record flight time, spray area, and chemical used. o Helps track performance and maintenance intervals. ________________________________________ ⚙️ 4. Periodic / Preventive Maintenance Frequency Tasks Weekly / Every 10–15 hours of flight • Inspect and clean all motors. • Tighten all screws. • Check all wiring and connectors. • Verify flow rate calibration of sprayer. Monthly / Every 40–50 hours of flight • Replace or rotate propellers if wear is visible. • Check motor bearings. • Update firmware (drone + controller + app). • Test pump pressure and flow sensors. Every 6 months or 100 hours • Replace nozzles and filters. • Replace worn propellers. • Check all seals and gaskets in liquid system. • Professional inspection or service if available. ________________________________________ ⚡ 5. Battery Maintenance (Very Important) • Use only approved chargers. • Keep charging area dry and cool. • Never charge immediately after flying — allow cooling for 15–20 min. • Store at ~3.8 V/cell (mid-charge). • Replace if: o Visible swelling o Voltage difference > 0.1 V between cells o Capacity drops below 80% of rated ________________________________________ 💧 6. Spraying System Maintenance • Use clean water for rinsing after every spraying session. • Remove and clean nozzle filters daily. • Check hose connections for cracks or leaks. • If using sticky fertilizers or micronutrients, run detergent or mild soap water through the system weekly to prevent buildup. • Store nozzles in water (not dry) if they are brass/stainless to prevent clogging. ________________________________________ 🧠 7. Software & Calibration • Update flight control, ground station, and spraying management software regularly (DJI, XAG, Garuda, etc.). • Recalibrate: o IMU and compass every 20–30 hours or after a transport/jolt. o Flow sensor every month (to maintain correct spray rate). ________________________________________ 🧑‍🔧 8. Common Replacement Intervals (Indian Conditions) Component Replace / Service Every Propellers 6 months or 100 hours Motors 300 hours or if noisy/vibrating Pump 150–200 hours Filters Monthly Nozzles 50–100 hours depending on chemical used Batteries 200 charge cycles or 1 year Flight Controller Calibration Every 20 hours or when drift seen ________________________________________ 🧾 9. Maintenance Record Log Example Date Flight Hours Task Done Technician Remarks 25 Oct 2025 42 hrs Nozzle cleaned, propeller tightened Rajesh Normal 28 Oct 2025 45 hrs Battery balanced charge Ramesh OK 31 Oct 2025 50 hrs Pump filter replaced Rajesh Slight blockage found Maintaining a maintenance logbook helps with warranty claims and DGCA compliance (for certified operations).
7. RISK ASSESSMENT AND ANALYSIS
Types of emergencies: • There are various kinds of emergencies that can occur at the time of operations of UAS • It is very important for us to know that what are the various kind of emergencies and how a particular stake holder should play their role in those situations. • Most important is to reduce the risks and losses involved with it • The different kinds of losses and most preferable actions to be taken are mentioned hereafter. Fly away (straying)-issue/ reason:  This emergency situation can be caused by hardware or software errors/failures on board of the RPA.  Due to a general non-availability of a distinct air navigation method, which would affect also all other RPAS using this method, e.g. due to a Global Positioning System (GPS) failure.  Compass Variance error which occurs due to a higher magnetic field  Failure of automatic/autonomous flight control. Fly away (straying) - preferred pilot action:  Change the Flight mode to a non-GPS mode. (Altitude Hold or Stabilize) and try to bring back the drone on complete manual flying mode  In case the Visual Line of sight is lost of the Drone, Pilot must initiate Land command immediately to avoid major accidents. Loss of uav power – reasons:  Loss of Power supply.  Vehicle battery voltage falls below a configured threshold.  LIPO battery fault owing to swelling or overheating of batteries.  Power Module Failure.  Internal Short Circuit. Loss of uav power-pilot action:  UAS rules makes it mandatory to equip UAVs of Small Category and above with an emergency recovery System.  This emergency recovery system also refers to recovery from the UAV Power Loss.  This can be catered by adding Parachute in UAVS to avoid sudden fall and crashing of drones at a higher speed.  If the UAV goes under complete Power shutdown, there is nothing a pilot can do as all the controls are powered down.  Pilot must make sure to locate UAV while its crash landing on Parachute.  Pilot is also responsible for reporting the Occurrence/Incidence report. Loss of c2 control link – reasons:  Communication loss can be either RC Loss or GCS communication loss  Frequency Interference  UAV distance more than the range of communication.  Obstacles in the Line Of Sight between drone and GCS.  The Communication Loss can also be due to the Power loss of UAV. Loss of control link-pilot action:  Switch Mode to RTL.  If the RC communication is lost, do it from GCS and switch the RC switch to RTL.  Set the Failsafe while configuring the UAV.  The UAS Rules makes it mandatory to have RTH Feature on termination of mission.  Try reaching at a higher altitude place to improve VLOS without any obstacles.  Wait for the Communication to be regained and if not, try to avoid straying away as mentioned in previous section. Other Emergencies:  Geo- fence Non-conformance- Geo fencing is always enabled and doesn’t allow pilot to fly outside the defined corridor.  Unsuccessful Landing Flight Termination- Return to Launch is always active, thereby preventing aircraft from landing outside defined areas. Control Surface Failures:  Rudder fail – Differential thrust in multi-engine aircrafts. Use of Ailerons in single engine airplanes.  Aileron failure – Usage of rudder and elevator in combination. Proper utilization of cross winds and cross wind runways.  Elevator failure – Use trim tabs. Control pitch through power and flap extension depends on your aircraft design, and successful landing under these conditions is challenging, but it can be done. Fail- Safe Features: Understanding Fail-Safe Features:- Fail-safe features are built-in mechanisms and protocols designed to ensure the safe operation of drones in the event of system failures or emergencies. These features aim to minimize the risks associated with equipment malfunctions or loss of control. Types of Fail-Safe Features:- Common fail-safe features found in drones include: Return-to-Home (RTH): When triggered, the drone automatically navigates back to its designated home point using GPS or other guidance systems. Auto-land: In the event of critical battery levels or system failures, the drone initiates an automatic landing procedure to prevent uncontrolled descents. Motor or Power Failure Response: Drones may have programmed responses to address motor or power failures, such as activating alternative power sources or adjusting flight controls for controlled descent.
9.PAYLOAD, INSTALLATION AND UTILIZATION
Drone Payload: From high-resolution cameras capturing stunning aerial footage to infrared sensors detecting heat signatures, drones are equipped with various payloads suited for different tasks. An aspect is the concept of payload drone capacity optimization – finding the perfect balance between weight and flight performance. Drone Payload VS Performance: As weight increases, flight time decreases. This is because the drone will need to work harder to fly. Higher weights require the drone to produce more lift. Increased lift is accomplished by spinning the propellers faster, which draws more power from the fuel source. Types of Payloads:  Dispensable Payloads- All the deliverable payloads to the consumer end are considered dispensable payloads. The dispensable payloads can be able to release from the aerial vehicle during the flight based on the received signal from the radio controller (RC) or ground control station (GCS).  Non-Dispensable Payloads – The Non-Dispensable payloads physical remains on the UAV throughout the mission, but their part plays a vital role in mission completion. Some of well-known non-dispensable payloads are Camera, LiDAR, companion computers, etc.  Active Payloads – The payloads which are entirely or partially active throughout the mission are called Active Payloads. The purpose of the active payload includes mapping, data collection, surveillance, and so on. Camera, LiDAR, Thermal Imager, etc., are considered active payloads.  Passive Payloads – The payloads which are inactive during the mission are called Passive Payloads. Mostly, passive payloads are deliverable at some predefined destination. Parts of Payloads:  The human eye is sensitive to red, green, and blue (RGB) bands of light.  Most standard drones come with cameras that capture the same RGB bands so the images they produce recreate almost exactly what our eyes see.  RGB Camera are good for creating Ortho mosaic maps that show your entire field at once, and they can capture aerial videos. Multispectral Camera: -  Multispectral cameras work by imaging different wavelengths of light.  The output of the camera is a set of images for that wavelength.  Multispectral sensor technology can see more things than the farmer’s naked eye. Thermal Camera: -  Temperature measurement  Heat detection  Night vision  Object detection  Search and rescue  Inspection (e.g., building, infrastructure)  Environmental monitoring (e.g., wildlife, water quality) LiDAR Sensor: -  Light Detection and Ranging or LiDAR is an active remote sensing technology where the environment is scanned with a pulsed laser beam and the reflection time of the signal from the object back to the detector is measured.  Remote sensing method used for measuring the exact distance of an object on the earth’s surface. Utilization: - The utilization of payloads depends on the specific mission objectives and the capabilities of the payload itself. Some examples of payload utilization include: • Aerial photography and videography for cinematography, surveying, or marketing purposes. • Environmental monitoring and analysis for agricultural assessments, wildlife surveys, or pollution tracking. • Infrastructure inspections for power lines, pipelines, or building structures. • Search and rescue operations, where payloads with thermal imaging or high-resolution cameras can assist in locating missing persons or identifying hazards. Application: - • Mapping and Surveying • Terrain Modelling • Object Detection and Tracking • Collision Avoidance • Inspection (e.g., infrastructure) • Environmental Monitoring (e.g., flood mapping) • Precision Agriculture. Payload Capabilities: Payloads may offer various features depending on their intended use. These can include: • High-resolution imaging capabilities for detailed aerial photography or mapping. • Real-time data streaming for immediate analysis or monitoring. • Specialized sensors for capturing specific types of data, such as thermal imaging or multispectral analysis. • Automated data processing or analysis features to enhance efficiency and accuracy.
10.PRE-FLIGHT & POST-FLIGHT CHECKLIST OF DRONE
1. Structural Integrity ☐ Check all screws and fasteners are tight ☐ Inspect arms and frame for cracks or damage ☐ Ensure landing gear is secure 2. Propellers & Motors ☐Check propellers for cracks or looseness ☐ Ensure propellers are properly mounted and secured ☐ Spin motors by hand to check for smooth rotation ☐ Inspect motor wires for damage or loose connections 3. Battery & Power System ☐ Check battery charge level ☐ Ensure battery is properly connected and secured ☐ Inspect battery for swelling or damage ☐ Verify power cables are properly connected 4. GPS & Navigation System ☐ Ensure GPS module is securely mounted ☐ Check GPS signal strength before take-off ☐ Confirm compass calibration if necessary 6. Spraying System ☐ Check liquid tank for leaks or cracks ☐ Ensure pump and valves are functioning correctly ☐ Inspect nozzles for clogs or blockages 7. Remote Controller & Telemetry ☐ Ensure remote controller is fully charged ☐ Verify proper connection between the controller and drone ☐ Check telemetry data for errors 8. Software & Flight Plan ☐ Update firmware if necessary ☐ Load flight plan and check waypoints ☐ Verify geofencing and no-fly zones 9. Weather & Environmental Conditions ☐ Check wind speed and weather conditions ☐ Ensure take-off area is clear of obstacles ☐ Confirm no people or animals are nearby 10. Final Pre-Flight Checks ☐ Arm motors and check for unusual noises ☐ Confirm all systems show "Ready to Fly" ☐ Take off in a controlled manner and hover for a few seconds before proceeding Post-Flight Checklist for Drones: 🛬 1. Landing Confirmation • Ensure the drone landed safely and upright. • Turn off motors/props before retrieving the drone. • Power off the aircraft and remote controller (in that order, unless otherwise specified by your drone manual). 🔋 2. Battery Inspection & Care • Remove battery from the drone. • Check for: o Swelling o Cracks o Leaks o Excessive heat • Record battery level and cycle count (if trackable). • Allow battery to cool down before charging. • Store at 50–60% charge if not flying again soon. 🔍 3. Physical Inspection Inspect the following components for wear, damage, or debris: Component Check For Propellers Cracks, chips, bends Motors Dirt, unusual noise, looseness Airframe/Arms Cracks, impact marks Landing Gear Scratches, deformation Gimbal & Camera Alignment, shake, lens smudges Antennas Secure and undamaged Use a soft brush or air blower to remove any dirt or dust, especially near motors and vents. 💾 4. Data Management • Download and back up flight logs, photos, and videos. • Check SD card health (replace if corrupted or too slow). • Review footage for quality assurance or anomalies (e.g., shaking = gimbal issue). 📡 5. Sensor & Firmware Review • Note any in-flight warnings or sensor errors (e.g., IMU, GPS, compass). • If any occurred, consider: o Recalibrating IMU, compass, or gimbal before next flight. o Checking firmware status via the flight app. 🧾 6. Log Flight Details (Especially for Commercial Use) Record the following in a flight logbook or app: • Date & time • Location • Weather conditions • Flight duration • Battery used • Any issues or incidents Apps for flight logging: DroneLogbook, AirData UAV, Kittyhawk (Aloft) 🔌 7. Recharge and Prep for Storage • Recharge or storage-charge batteries. • Store the drone in a cool, dry, dust-free place. • Remove propellers if storing long-term. • Keep firmware updated if connected to a computer or app. 🛠️ 8. Schedule Maintenance (if needed) • If you noticed any vibration, drift, or motor noise, schedule inspection. • Replace: o Propellers (if nicked or overused) o Batteries (if swollen or degraded) • Clean camera lens and sensors gently with lens wipes or microfiber cloth
11. INTERNATIONAL RULES, REGULATIONS, STANDARDS & PRACTICES
International Civil Aviation Organization (ICAO): • The International Civil Aviation Organization (ICAO) is a United Nations agency that coordinates international air navigation and air transport development: • Purpose: ICAO’s goal is to ensure safe and efficient international air travel for peaceful purpose: • Membership: ICAO has 193 member states, which are signatory states to the Chicago Convention of 1944. • Headquarters: ICAO’s headquarter is Montreal Canada. • Structure: ICAO has several component bodies, including an Assembly a Council, an Air Navigation Commission, and standing committees. • Function: ICAO research new air transport policies and standardization innovations, and maintain an administrative bureaucracy to support diplomatic interactions. • Standards: ICAO standards do not supersede national regulatory requirements. • Strategic objectives: ICAO’s strategic objectives include safety, air navigation capacity, security, economic development, and environmental protection. Directorate General of Civil Aviation (DGCA): • The Directorate General of Civil Aviation (DGCA) is the regulatory body in India that governs civil aviation, including air safety, airworthiness, and air transport services: • The DGCA was established in 1971 and is headquartered in New Delhi. Aeronautical Information Publication (AIP): • Aeronautical Information Publication (AIP) is a manual that contains information essential for air navigation, including local regulations, procedures, and details about air traffic control, airports, and airways. • AIPs are issued by a state’s civil aviation administration and are used by pilots, air traffic controllers, and other aviation professionals. NOTAM: - A Notice to Airmen (NOTAM) is a notice that alert aircraft pilots to potential hazards or changes that could affect their flight. Civil Aviation Requirements (CARs): Civil Aviation Requirements (CARs) are the rules and regulations issued by a country's civil aviation authority to govern all aspects of civil aviation—including aircraft operation, safety, airworthiness, licensing, training, maintenance, and more. CARs are issued by the Directorate General of Civil Aviation (DGCA) under the Aircraft Act, 1934 and the Aircraft Rules, 1937. 12. Do’s and Don’t
12. NO DRONE ZONES
Temporary Red Zone:  If there is an urgent need to temporarily prohibit unmanned aircraft system flights in any specified area, the concerned State Government or the Union Territory Administration or a law enforcement agency may declare a temporary red zone over such specified area, for a period not exceeding ninety six hours at a time, by notifying it through the digital sky platform and highlighting it on the airspace map.  The temporary red zone shall be declared by an officer not below the rank of Superintendent of Police or his equivalent and such officer shall endeavour to keep the size of the temporary red zone reasonable and not excessive.
13.TAKE-OFF, LANDING, AND FLIGHT
Take-off procedures (Fixed wing): Acceleration: Gradually increasing the throttle to gain speed. Rotation: Lifting the nose of the aircraft to transition from ground roll to flight. Liftoff: Achieving sufficient air speed and lift to become airborne. Landing procedures: Approach: Descending towards the landing area, following a predetermined path. Descent: Reducing altitude and airspeed gradually. Flare: Just before the touchdown, the pilot smoothly reduces the rate of descent to minimize impact. Touchdown: The aircraft contacts the landing surface. Cruise flight: Maintaining level flight: Adjusting the control surfaces and throttle to maintain a constant altitude and air speed. Adjusting airspeed: Increasing or decreasing the throttle to change the aircraft's speed. Monitoring altitude: Regularly checking.
14.LONGITUDE/ LATITUDE
Latitude measures how far north or south a location is from the Equator. Longitude measures how far east or west a location is from the Prime Meridian India’s Time Zone: IST (Indian Standard Time) • IST = UTC +5:30 o That means India is 5 hours and 30 minutes ahead of UTC (Coordinated Universal Time). 🧭 Relation Between Longitude and Time • The Earth is divided into 24 time zones, each covering 15° of longitude (because 360° ÷ 24 hours = 15° per hour). • Every 15° east you go from the Prime Meridian (0° longitude), local time is 1 hour ahead. • Every 15° west, it’s 1 hour behind. 🇮🇳 Why India is UTC+5:30? • The standard meridian of India is 82.5° East longitude. • Using the time zone rule: 82.5° ÷ 15° = 5.5 hours, or 5 hours and 30 minutes ahead of UTC. 📍 Where is 82.5° E in India? • It passes near Mirzapur in Uttar Pradesh. • This line is used to calculate the official time across all of India, even though the country spans multiple longitudes.
16.AVIONICS & C2 LINK
 The data gathered about the aircraft and its surroundings is sent back to the ground control station via telemetry/data link.  A digital two-way data stream, which can send data to both the ground station and can also send commands to the autopilot.  Used to Collect Data regarding the drone and the data that is collected by the drone via its sensors.
16. SAFETY ATTITUDE WHEN FLYING A DRONE
🚨 1. Protects People and Property • Drones can cause serious injury or property damage if misused. • A safety-first attitude ensures you're flying in a way that avoids collisions with people, vehicles, buildings, or animals. ________________________________________ 📡 2. Reduces Risk of Accidents • Many drone accidents happen due to pilot error, carelessness, or lack of preparation. • A safety attitude means pre-flight checks, staying aware of surroundings, and avoiding risky maneuvers. ________________________________________ 📜 3. Ensures Legal Compliance • Aviation authorities (like the FAA, CAA, or CASA) have strict rules for drone operation, especially near airports or crowded areas. • Pilots with a safety mindset make sure they understand and follow the laws to avoid fines or legal action. ________________________________________ 🧠 4. Promotes Good Judgment and Responsibility • A safety attitude fosters discipline—like checking weather, battery levels, and GPS connection before flying. • It helps you avoid reckless behavior and make sound decisions, especially in emergencies. ________________________________________ 🛑 5. Minimizes Public Fear and Negative Perception • Irresponsible drone use can make the public feel unsafe or annoyed, leading to stricter regulations. • Responsible, safe flying helps build trust and acceptance of drones in society. ________________________________________ 🚁 6. Preserves Your Equipment • Crashes or risky flights can damage expensive drone gear. Thinking safety-first helps protect your investment.
17. INTRODUCTION TO MISSION PLANNING, INSTRUMENT FLYING, AND NAVIGATION (GROUND CONTROL STATION)
Mission Planning: Mission planning involves defining the objectives, selecting the flight path, setting waypoints, and considering factors such as airspace regulations, weather conditions, and payload requirements. Mission planning ensures safe and successful drone operations by optimizing the flight route and parameters. Instrument Flying: Instrument flying refers to operating a drone based on instrument readings and flight data rather than relying on visual cues. It is particularly useful in low-visibility conditions or complex environments. The flight controller, GPS, and other on board instruments enable instrument flying by providing accurate positioning, altitude, and attitude information. Navigation (Ground Control Station): The ground control station (GCS) serves as the command center for drone operations. It provides a user interface for mission planning, real-time telemetry data, video feeds, and control interfaces. The GCS allows operators to monitor the drone's status, adjust flight parameters, and communicate with the drone during the mission.
18. FAVOURABLE CONDITIONS FOR DRONE OPERATION
✅ 1. Weather Conditions • Clear Skies: No fog, heavy clouds, or precipitation. • Low Wind Speeds: Ideally below 10 M/S, depending on the drone model. • No Rain or Snow: Moisture can damage electronics and obscure visibility. • Mild Temperatures: Extreme cold or heat can affect battery life and performance. • Stable Atmospheric Conditions: Avoid thermal turbulence or sudden pressure changes. ✅ 2. Daylight and Visibility • Good Visibility. • Daylight Hours: Most regulations require flying only during civil twilight or daylight (unless specifically authorized for night operations). • Sun Angle Considerations: Avoid flying directly into the sun to maintain visual contact and camera visibility. ✅ 3. Legal and Regulatory Conditions • Airspace Clearance: o Fly in Class G airspace, or get authorization for controlled airspace (Class B, C, D, E). o Use apps like AirMap to check airspace status. • No Temporary Flight Restrictions (TFRs): Check for any NOTAMs (Notices to Airmen). • Compliant with Local Laws: Be aware of city, county, or country-level restrictions. ✅ 4. Site Conditions • Open Areas: Prefer large, obstacle-free zones like fields or parks. • Away from Crowds: Minimizes risk and is often required by law. • No Interference Sources: Avoid areas with strong magnetic interference (e.g., near power lines, cell towers, or large metal structures). ✅ 5. Drone Readiness • Fully Charged Batteries • Calibrated Compass and IMU • Updated Firmware • Pre-flight Checklist Completed ✅ 6. Pilot Preparedness • Well-rested and Alert • Familiar with Area and Regulations • Properly Licensed (e.g., DGCA Licensed) • Emergency Procedures Known
19. EMERGENCY PROCEDURES DURING SUDDEN SHIFT IN WEATHER CONDITIONS
🚨 Emergency Procedures for Sudden Weather Changes ⚠️ Recognize the Warning Signs • Sudden gusty winds or turbulence • Darkening skies or fast-moving clouds • Sudden loss of visibility (fog, rain, snow) • Unexpected temperature drop • Weather app or alert shows incoming storm ✅ Step-by-Step Response Plan 1. Initiate Return-to-Home (RTH) Immediately • If visibility and control are still good, activate RTH or manually navigate the drone back. • Maintain line of sight as long as possible. • Monitor altitude to avoid trees, buildings, and power lines. 2. Lower Altitude • Descend to a safer, lower altitude to reduce wind exposure and regain control if the drone is drifting. • Be aware of nearby obstacles. 3. Find the Closest Safe Landing Zone • If returning home is not possible, identify a clear, open area to land immediately. • Do not risk flying over people, vehicles, or bodies of water. 4. Switch to Manual Mode (If RTH Fails or GPS Is Unstable) • Be prepared to take full manual control if: o GPS signal is weak o Compass errors occur o Drone becomes unresponsive to RTH 5. Land Immediately in Heavy Precipitation or Lightning • Moisture can severely damage the drone’s electronics. • Prioritize safe emergency landing over reaching the home point. 6. Maintain Situational Awareness • Be aware of changing cloud formations, wind shifts, and other aircraft in the area. • Don’t lose sight of the drone. The atmosphere plays a critical role in the operation of RPAS (Remotely Piloted Aircraft Systems), commonly known as drones. Understanding atmospheric effects and hazardous weather conditions is essential for safe, efficient, and legal drone flights. 🌍 Effect of Atmosphere on RPAS Operations 1. Wind • Light Winds: Generally safe; most drones can handle up to 10 M/S. • Strong/Gusty Winds: o Reduce drone stability and control. o Drain batteries faster as motors work harder. o Can blow drones off-course or cause crashes. Effect: Loss of GPS stability, increased drift, reduced flight time, and compromised video quality. 2. Temperature • Cold Weather: o Shortens battery life significantly. o May cause condensation inside electronics. • Hot Weather: o Increases risk of battery overheating. o Affects sensor accuracy and motor efficiency. Effect: Reduced flight time, potential damage to internal components, poor system performance. 3. Humidity & Precipitation • High Humidity: o Risk of internal condensation. o Can affect sensor performance (especially barometers). • Rain/Snow: o Can short-circuit electronics. o Reduces visibility for FPV and visual line-of-sight flying. Effect: Equipment failure, legal violations, loss of visual control. 4. Air Pressure & Density Altitude • High Altitude/Low Air Density: o Reduces lift and motor efficiency. o Affects barometric altitude readings. o Leads to longer takeoff rolls and slower climbs. Effect: Lower flight performance, sluggish response, increased energy use. 5. Visibility (Fog, Haze, Smoke) • Degrades visual line of sight (VLOS). • Affects camera feeds and obstacle detection systems. • Violates regulations if visibility is below legal minimums. Effect: Loss of situational awareness, increased collision risk, regulatory non-compliance. 6. Electrostatic & Solar Activity • Thunderstorms: Lightning can cause electrostatic discharge. • Solar storms: May interfere with GPS accuracy. Effect: Navigation errors, potential signal loss
20. TOOLS & EQUIPMENT TO MEASURE ATMOSPHERIC COMPONENTS
1. 🌬️ Anemometer (Wind Meter) • Measures: Wind speed and sometimes direction • Use: Assess if wind is within your drone's safe operating range • Types: o Handheld digital anemometers o Smartphone-compatible Bluetooth models • Popular brands: Kestrel, HoldPeak, WeatherFlow ✅ Critical for checking wind at ground level and estimating conditions at flight altitude. 2. 🌡️ Thermometer (Digital Weather Station or Handheld) • Measures: Ambient temperature • Use: Prevent flying in temperatures outside your drone’s rated range • Bonus: Some models also measure humidity and pressure 3. 💧 Hygrometer • Measures: Relative humidity • Use: Avoid flying in high humidity conditions that may cause condensation or sensor issues ✅ Often included in multi-function weather meters. 4. 🌫️ Visibility Sensor / Portable Weather Station • Measures: Visibility range, fog, haze • Use: Ensure visibility meets VLOS or EVLOS flight requirements • Tools: o Portable weather stations with visibility readings o Use apps with METAR/TAF data from nearby airports (e.g., Windy, AviaWeather) 5. 📉 Barometer / Altimeter • Measures: Atmospheric pressure • Use: Monitor pressure changes that can affect drone altitude sensors and GPS performance ✅ Helpful in high-altitude or mountainous areas where pressure changes quickly. 6. 📡 GNSS Signal Monitor / GPS Analyzer • Measures: GPS signal strength and satellite lock • Use: Assess GPS reliability before flight (especially important in solar storm conditions or urban canyons
21. Drone Flight Terminology (Basic Manoeuvres)
These terms are foundational to drone flight — especially useful for manual flying, mission planning, or training for certifications (like the FAA Part 107 or equivalent). 🔹 1. Cruise (Straight-and-Level Flight) • Definition: Flying at a constant altitude, heading, and speed. • Purpose: Used for transit between points, aerial surveying, or photography. • Key Controls Involved: o Throttle to maintain speed o Pitch (neutral) to keep altitude o Yaw and roll stable 🧭 In cruise, all major flight inputs are minimal and balanced. 🔹 2. Turn • Definition: Changing the drone’s heading (direction) while maintaining altitude. • Types: o Flat (level) turn: No altitude change o Controlled using yaw (left/right) and sometimes roll for banked turns 📸 Used when tracking subjects, orbiting a point, or changing direction mid-flight. 🔹 3. Climb (Climbing Flight) • Definition: Gaining altitude while maintaining heading (direction). • Input: Increase throttle and pitch nose-up slightly • Used For: o Avoiding obstacles o Reaching cruising altitude o Terrain following 📌 Monitor battery drain — climbing requires more power. 🔹 4. Climbing Turn • Definition: Gaining altitude while also turning (changing heading). • Inputs: o Combine yaw, pitch-up, and throttle o Add roll for banked turn if needed • Used For: o Ascending while repositioning (e.g., spiral climbs) o Avoiding obstacles during take-off ⚠️ Requires careful coordination to maintain control and avoid drifting off path. 🔹 5. Descent (Descending Flight) • Definition: Reducing altitude while maintaining direction. • Input: Decrease throttle, apply slight pitch-down • Used For: o Landing o Getting below clouds or obstacles ⚠️ Descend slowly to avoid "vortex ring state" (in rotorcraft-style drones). 🔹 6. Descending Turn • Definition: Losing altitude while also turning. • Inputs: o Reduce throttle o Apply yaw (and roll if banking) o Moderate pitch-down • Used For: o Spiralling down to land o Repositioning while descending
22. DRONE PHOTOGRAMMETRY
Pre-flight Planning Define the Survey or Mapping Area  Mapping: Identify the area you want to map. This could be a construction site, agricultural field, or forest area.  Surveying: Specify the area to be surveyed for boundary definitions, elevation measurements, or volumetric calculations. This could include land plots, construction sites, or stockpiles. Select the Right Drone and Sensors  Mapping: o Camera-based drones (e.g., DJI Phantom 4 RTK, Matrice 300 RTK) with high-resolution RGB cameras, multispectral cameras, or thermal sensors are typically used. o For larger areas, fixed-wing drones (e.g., SenseFly eBee X) are often preferred because of their extended flight times and ability to cover more area.  Surveying: o RTK or PPK Drones (e.g., DJI Phantom 4 RTK or Matrice 300 RTK) are used for precise, centimetre-level georeferencing, necessary for legal or engineering surveys. o LiDAR-equipped drones are used in cases where high-detail 3D models or terrain mapping is required, such as in forestry, mining, or infrastructure inspection. Flight Path Planning Flight Path Design: Use flight planning software (e.g., Pix4Dcapture, o DroneDeploy) to create a flight path that ensures the drone covers the entire survey or mapping area. o Overlap: Set an overlap of around 60-80% for photogrammetry to ensure highquality stitching of images. o Altitude: Choose an altitude that balances image resolution (lower for higher detail) and coverage area (higher for larger coverage).  GCPs (Ground Control Points): In surveying, GCPs are markers placed at known locations to enhance the accuracy of the georeferencing process. GCPs can be surveyed with a high-precision GPS to achieve better accuracy. Weather and Safety Checks  Weather Conditions: Ensure there are no adverse weather conditions, such as high winds, rain, or extreme temperatures, which could a act the flight.  Safety and Regulations: Make sure the area is safe for flying (no-fly zones), and check for any relevant local regulations for drone operations (e.g., height limits, permissions). Data Collection (Flight Execution) Launch the Drone o Automated Flight: Using the planned flight path, the drone is launched and automatically follows the flight route. Most modern drones are equipped with autopilot systems that ensure consistent coverage of the area. Data Capture Mapping:  The drone captures overlapping high-resolution images at regular intervals. For photogrammetry, these images are used to create 2D Ortho mosaics, 3D models, or point clouds. o Multispectral Cameras: These cameras capture data across multiple wavelengths, which is useful for applications like crop health monitoring (NDVI analysis). o Thermal Cameras: Used for infrastructure inspections or monitoring heat variations in buildings and equipment. Surveying: o RTK/PPK: The drone uses RTK (RealTime Kinematic) or PPK (Post-Processed Kinematic) technology for precise positioning. It gathers accurate geospatial data for measurements. o LiDAR: A LiDAR-equipped drone shoots laser pulses to map the terrain, creating detailed 3D point clouds. o GCPs: If using Ground Control Points (GCPs), they will be recorded with GPS coordinates, helping align the drone data to real-world coordinates. Real-time Monitoring  Live Data Feed: For more advanced surveys, a real-time data feed can be used to monitor the drone's performance during flight, ensuring that no data is missing and that coverage is complete. Data Processing Upload Data to Processing Software  Software Tools: After completing the flight, the collected data (images, LiDAR point clouds, GPS data) is uploaded to specialized processing software. Popular software tools include:  Pix4D: A widely used software for photogrammetry that generates orthomosaics and 3D models.  DroneDeploy: User-friendly software for creating maps and models.  Agisoft Metashape: Advanced photogrammetry software often used for detailed 3D reconstructions.  Lidar360: Used for processing LiDAR data into detailed 3D models and point clouds. Georeferencing  Aligning Data: The GPS data collected during the flight (or from GCPs) is used to ensure that the images or LiDAR point clouds are accurately placed in geographic space. Accuracy Enhancements: If Ground Control Points (GCPs) were used, they are integrated into the software to increase accuracy in the final model. Stitching Images (for Photogrammetry)  Image Stitching: For photogrammetry, the overlapping images are stitched together into a single large image, creating an orthomosaic. Software uses algorithms to merge the images while correcting distortions and maintaining consistent image quality. Creating 3D Models (if applicable)  3D Models or Point Clouds: Using photogrammetry or LiDAR data, the software generates 3D models or point clouds. Point clouds are sets of data points in space that represent the external surface of an object or terrain.  Model Refinement: In some cases, further refinement or editing of the models may be necessary to remove artifacts or errors. Data Analysis Topographic and Measurement Analysis  Topographic Maps: For surveying, the processed data is used to generate detailed topographic maps with elevation data.  Contours: Contour lines are drawn to represent elevation changes in the landscape.  Volume Calculations: If you are surveying stockpiles, excavation sites, or other volumetric features, software tools can calculate the volume of materials.  Boundary and Area Measurement: For land surveys, boundaries, and areas are measured precisely, with results available in various formats (e.g., square feet, hectares, acres). Advanced Analysis  Change Detection: Comparing drone data over time to detect changes in landforms, structures, or vegetation.  NDVI Analysis: For agriculture, Normalized Di erence Vegetation Index (NDVI) maps can be generated to assess crop health and growth patterns using multispectral imagery. Output and Reporting Exporting Data  Map and Model Export: After processing, the final maps, models, or point clouds are exported in various formats such as: o GeoTIFF (for raster maps) o LAS/LAZ (for LiDAR point clouds) o OBJ or PLY (for 3D models) o DXF (for CAD applications) Deliverables and Reports  Final Reports: Detailed reports can be created summarizing the survey or mapping process, analysis results, and conclusions.  3D Visualizations: Some software provides 3D visualizations that can be explored interactively, especially useful for construction, mining, and urban planning.  Integration with GIS: The data can be integrated into Geographic Information Systems (GIS) for further analysis and decision-making. Post-Flight Activities (Optional) Reprocessing  If there are inaccuracies in the data (e.g., missing coverage, alignment issues), the data might need to be reprocessed or additional flights might be scheduled. Model Updates  For long-term projects, drones may be deployed at regular intervals to update models, monitor construction progress, or assess environmental changes.
23. SELECT APPROPRIATE DRONES
When selecting drones for crop-spraying (fertilisers / herbicides / pesticides) you should match the size of the tank/reservoir (and thus payload) with your field size, chemical application rate and flight capabilities.  Tank / reservoir capacity (litres) – the bigger the field and/or higher the flow-rate, the larger you’ll want.  Payload & take-off weight – chemical + liquid + tank + drone + battery must be within spec.  Flight time / coverage per battery load – in Indian field/terrain conditions (wind, crops, access).  Spray flow rate / width / nozzle configuration – to match crop type and chemical type.  Service/support/spares availability in India – maintenance, regulation, training.  Compatibility with your farm size, terrain, crop‐type (row crops vs orchard vs paddy) and the chemical you intend.  Regulatory compliance – for spraying in India, chemical usage, drone licences etc. Recommendation:  If your area is small to medium (say up to 10-30 acres or spot treatment) → Go with a 10 L capacity drone (like the first 4 above). They cost less, easier to manage, less battery/weight issues.  If your area is large (many tens of acres, or you want to cover many farmers or a custom-hiring service) → Consider something ≥ 30 L capacity like the DJI Agras T30.  Ensure you check availability of parts, local service/repair, and you have a trained pilot/operator (or you plan one).  Also factor in chemicals: make sure the spray system supports the type of fertiliser/herbicide/pesticide (viscosity, droplet size, nozzle flow rate) you plan to use.  Because in India spray conditions (wind, crop height, terrain irregularities) can make coverage less efficient than ideal specs. Ex. EFT E610P 10 L Agriculture Spraying Drone, EFT E410P 10 L Agriculture Spraying Drone, DJI Agras T30 (30 L+ capacity). 30 L capacity drone 10 L capacity drone
24. NOZZLE SYSTEM ATTACHMENT AND CONFIGURATION
Efficient nozzle system attachment and configuration to ensure uniform spray coverage (swath continuity) while flying at the minimum permitted altitude above the crop canopy. 1. Nozzle System Components A typical drone spraying nozzle system consists of: Component Function Spray Tank Holds the fertilizer/herbicide/pesticide solution Pump / Flow Meter Maintains constant pressure and controls flow rate Main Spray Line (Manifold) Distributes liquid to multiple nozzles Nozzles (2–8 depending on drone size) Atomize liquid into fine droplets Filters Prevent clogging Mounting Arms / Booms Hold nozzles below propeller airflow Flow Controller (Electronic) Adjusts spray output in real time based on speed and height ________________________________________ 🧰 2. Nozzle Attachment — General Arrangement I. Nozzle Placement a. Nozzles are mounted below each propeller (propwash-assisted spraying) or on small booms extending outward from the frame. b. The propeller airflow helps push droplets downward and improve penetration into the canopy. II. Angle of Nozzles a. Outward tilt: 10°–15° from vertical to increase lateral overlap between adjacent nozzles. b. Downward tilt: Slight downward angle (5°–10°) to prevent drift from crosswinds. III. Height Above Crop a. According to DGCA and ICAR guidelines, spraying should be done at a minimum height of 2–3 meters above the crop canopy. b. Flying too high → drift and uneven distribution. Flying too low → insufficient swath overlap and turbulence interference. IV. Spacing Between Nozzles a. Distance between nozzles (D) should be set so that the spray patterns overlap by 30–50% at the working height. b. For example: i. If effective spray width per nozzle = 1.5 m → spacing = 0.75–1.0 m to maintain uniform coverage. Example Configuration (for 10–20 L Drone) Parameter Value Number of Nozzles 4–8 (depending on drone size) Type Hollow cone / Twin-jet Height above crop 2–3 m Swath width 5–7 m Flight speed 4–5 m/s Flow rate 1–2 L/min (depending on chemical and area) Overlap 30–40% between adjacent nozzles
25. TRACK THE FIELDS AND FIX THE COORDINATES
Step-by-Step Procedure Step 1: Field Boundary Survey 1. Walk the boundary with a handheld GPS (or your drone in mapping mode). o Record corner coordinates: every turn or change in boundary shape. o For accurate readings, stand still for a few seconds at each point. 2. Alternatively, fly the drone manually over the boundary line while recording GPS logs in the app. 3. Save points as: • Point 1: 23.250451°N, 77.438822°E • Point 2: 23.250790°N, 77.439501°E • Point 3: 23.250602°N, 77.440012°E • Point 4: 23.250205°N, 77.439350°E 4. Connect all points sequentially — this forms your field polygon. ________________________________________ Step 2: Import and Verify Coordinates Use software such as QGIS or Google Earth Pro: • Import your recorded points (CSV or KML format). • Connect them into a polygon layer. • Overlay with satellite imagery to verify boundaries align with actual field edges. • Correct or adjust points if needed. Pro Tip: For larger farms, use UTM coordinates (in meters) — they’re easier for calculating area and flight paths. ________________________________________ Step 3: Upload Coordinates to Drone App Depending on your drone model: Drone Type App / Software How to Upload Coordinates DJI Agras (T10, T20, T30, T50) DJI SmartFarm / DJI Agras App Import .kml or .shp boundary file directly. The app auto-generates flight path and spray grid. Garuda Kisan Drone Garuda Agri-DaaS Use "Field Mapping" mode → tap points manually or import CSV/KML. IoTechWorld Agribot IoTechWorld App Field coordinates can be imported or drawn on the built-in map. XAG Drones XAG One App Use “Field Survey” mode to trace or import polygons. Once imported, the software auto-creates: • Spray grid (with 50% overlap) • Entry & exit points • Return-to-home route • Altitude settings ________________________________________ Step 4: Fix the Home / Take-Off Coordinate • Choose a flat, obstruction-free area near the field edge. • Mark this point as “Home Point” in the drone app. • The drone will automatically return here after each flight or in case of low battery. ________________________________________ Step 5: Store and Label the Field In your app or farm management software: • Label each field (e.g., Field A – Soybean – 3.5 ha). • Save coordinates, crop type, last spray date, and operator info. • This enables repeatable, automated missions in future seasons. ________________________________________ Step 6: Optional – Integrate with Digital Sky (DGCA) If you’re conducting spraying commercially: 1. Log into Digital Sky Platform (DGCA). 2. Upload your operation zone (field polygon). 3. Obtain NPNT (No-Permission–No-Takeoff) approval for the coordinates. 4. Once approved, coordinates are geo-fenced for legal operation. Maintain Field Coordinate Record: Field ID Crop Area (ha) Lat (°N) Long (°E) Alt (m) Date Mapped F001 Paddy 2.6 23.253420 77.438120 492 24-Oct-2025 F002 Soybean 1.8 23.255022 77.439912 495 25-Oct-2025
KISAN DRONE OPERATOR

                                  FORM D-1

(See rule 9)

APPLICATION FOR TYPE CERTIFICATE

Part A – Details of individual (if applicable)

1

Full name

 

2

Mobile number (linked to the Aadhaar number)

 

3

E-mail address

 

4

Aadhaar number

 

5

Indian passport number

 

6

Permanent account number (optional)

 

7

Residential address

 

Part B – Details of organisation (if applicable)

8

Name of the manufacturer

 

9

Address of the manufacturer

 

10

Registration number of organisation

 

 

11

GSTIN certificate (optional)

 

12

Name of the Director(s) with their DIN

 

13

Aadhaar number of one Director

 

14

E-mail address of the Director

 

15

Mobile number of the Director (linked to the Aadhaar number)

 

Part C – Unmanned aircraft system specifications and documents

16

Model name 

 

17

Category of UAS

☐ Aeroplane     ☐ Rotorcraft    ☐ Hybrid

18

Sub-category of UAS

☐ RPAS        ☐ Model         ☐ Autonomous

19

Class of UAS

☐ Nano ☐ Micro ☐ Small ☐ Medium ☐ Large

20

Specifications of flight control module

 

21

Specifications of remote pilot station

 

22

Maximum all-up-weight (including payload) in kg

 

23

Overall dimensions (l x b x h) in mm

 

24

Description

 

25

Details of compatible payload

 

26

Variable load / consumables (like fluid etc., if any)

 

27

Engine/ Motor

 

28

Power rating

 

29

Number of engines/ motors

 

30

Total fuel capacity (kg)/ Battery capacity (mAh)

 

31

Propeller details

 

32

Ground control station software version

 

33

Frequency band

 

34

Maximum endurance 

 

35

Maximum range (in km)

 

36

Maximum speed (in m/s)

 

37

Maximum height attainable/ Maximum ceiling height (in feet)

 

38

Operating altitude (in feet)

 

39

Operational envelope

 

40

Engine limits (maximum RPM) / Maximum battery temperature (in ⁰C)

 

41

Propeller limits

 

42

Manufacturer’s operating manual (as applicable) 

 

43

Manufacturer’s maintenance guidelines (as applicable)

 

44

Maintenance inspection schedule / Overhaul interval

 

45

Photographs of the unmanned aircraft system: a) Front view

b) Top view

 

46

Select authorised testing entity (from dropdown menu on digital sky platform)

 

Part D – Fee details

47

Transaction number

 

48

Fee receipt

 

 

DECLARATION

I hereby declare that all information provided herein are true and correct to the best of my knowledge. I understand that furnishing any false information herein shall make me liable for penal action, as applicable.

Name: 

   Date:                                                    Place: 

 

FORM D-2

(See rule 15 and 16)  

APPLICATION FOR REGISTRATION  OF UNIQUE IDENTIFICATION NUMBER

Part A – Details of individual (if applicable)

1

Full name

 

2

Mobile number (linked to the Aadhaar number)

 

3

E-mail address

 

4

Aadhaar number

 

5

Indian passport number

 

6

Permanent account number (optional)

 

 

7

Residential address

 

Part B – Details of organisation (if applicable)

8

Name of the organisation

 

9

Address of the organisation

 

10

Registration number of organisation

 

11

GSTIN certificate (optional)

 

12

Name of the Director(s) with their DIN

 

13

Aadhaar number of one Director

 

14

E-mail address of the Director

 

15

Mobile number of the Director (linked to the Aadhaar number)

 

Part C – Unmanned aircraft system specifications

16

Category of UAS

☐ Aeroplane     ☐ Rotorcraft    ☐ Hybrid

17

Sub-category of UAS

☐ RPAS        ☐ Model         ☐ Autonomous

18

Class of UAS

☐ Nano ☐ Micro ☐ Small ☐ Medium ☐ Large

19

Manufacturer’s name

 

20

Model name

 

21

Serial number of type certificate (if applicable)

 

22

Serial number provided by manufacturer

 

23

Serial number of fight control module

 

24

Serial number of remote pilot station

 

25

Photographs of the unmanned aircraft system: a) Front view

b)     Top view

c)     Close-up of manufacturer’s serial number

 

26

Drone Acknowledgement Number (DAN) 

(if applicable)

 

27

Upload GST-paid invoice (Only for DAN holders)

 

 

Part D – Fee details

28

Transaction number

 

29

Fee receipt

 

 

DECLARATION

I hereby declare that all information provided herein are true and correct to the best of my knowledge. I further declare that this unmanned aircraft system conforms to the type certificate mentioned in the form (if applicable). I understand that furnishing any false information herein shall make me liable for penal action, as applicable.

Name: 

   Date:                                                    Place: 

 

                                                                                       FORM D-3

(See rules 17 and 18)

APPLICATION FOR TRANSFER OR DEREGISTRATION OF UNMANNED AIRCRAFT

SYSTEMS

Part A – Unmanned aircraft system details

1

Unique identification number (UIN)

 

2

Model name

 

3

All up weight

 

Part B – Transferor/ Owner details

4

Full name of individual or organisation

 

5

Aadhaar number (for individual)

 

6

Indian passport number(for individual)

 

7

E-mail address

 

8

Mobile number linked to the Aadhaar number

 

9

Address

 

10

Permanent account number (optional)

 

11

GSTIN certificate (optional)

 

12

Nature of transaction

☐ Transfer      ☐ Deregistration (Skip to Part D)

13

Nature of transfer (if applicable)

☐ Sale     ☐ Lease     ☐ Gift      ☐ Others

Part C – Transferee details (if applicable)

 

Details of individual (if applicable)

 

14

Full name

 

15

Mobile number (linked to the Aadhaar number)

 

16

E-mail address

 

17

Aadhaar number

 

18

Indian passport number

 

19

Permanent account number (optional)

 

20

Residential address

 

Details of organisation (if applicable)

 

21

Name of the organisation

 

22

Address of the organisation

 

23

Registration number of organisation

 

24

GSTIN certificate (optional)

 

25

Name of the Director(s) with their DIN

 

26

Aadhaar number of one Director

 

27

E-mail address of the Director

 

28

Mobile number of the Director (linked to the Aadhaar number)

 

Part D – Deregistration details (if applicable)

 

29

Reason for deregistration 

☐ Permanently lost    ☐ Permanently damaged

Part E – Fee details

 

30

Transaction number

 

31

Fee receipt

 

DECLARATION

 

I hereby declare that all information provided herein are true and correct to the best of my knowledge. I understand that furnishing any false information herein shall make me liable for penal action, as applicable.

Name: 

   Date:                                                    Place: 

        

FORM D-4

(See rules 34 and 35)

APPLICATION FOR REMOTE PILOT LICENCE (TO BE FILED BY RPTO)

Part A – Details of individual

1

Full name

 

2

Date of birth (DD MMM YYYY)

 

3

Latest photograph

 

4

Aadhaar number

 

5

Indian passport number

 

6

E-mail address

 

7

Phone number

 

8

Residential address

 

Part B – Training details

9

Name of the training organisation

 

10

DGCA authorisation number of training organisation

 

11

Category of UAS

☐ Aeroplane     ☐ Rotorcraft    ☐ Hybrid

12

Sub-category of UAS

☐ RPAS        ☐ Model         ☐ Autonomous

13

Class of UAS

☐ Nano ☐ Micro ☐ Small ☐ Medium ☐ Large

14

Training certificate number issued by RPTO

 

Part C – Fee details

15

Transaction number

 

16

Fee receipt

 

 

DECLARATION

I hereby declare that all information provided herein are true and correct to the best of my knowledge. I understand that furnishing any false information herein shall make me liable for penal action, as applicable.

Name: 

   Date:                                                    Place: 

 

 

 

FORM D-5

(See rules 39 and 40)

APPLICATION FOR AUTHORISATION OF REMOTE PILOT TRAINING ORGANISATION

Part A – Details of individual or head of the organisation

1

Full name

 

2

Mobile number (linked to the Aadhaar number)

 

3

E-mail address

 

4

Aadhaar number

 

5

Indian passport number

 

6

Permanent account number (optional)

 

7

Residential address

 

Part B – Organisation details  

8

Name of the organisation

 

9

Address of the organisation

 

10

Registration number of organisation

 

11

GSTIN certificate (optional)

 

12

Name of the Director(s) with their DIN

 

13

Aadhaar number of one Director

 

14

E-mail address of the Director

 

15

Mobile number of the Director (linked to the Aadhaar number)

 

Part C – Infrastructure

16

Proof of land ownership or rental agreement

 

17

Number of classrooms

 

18

Total area of the classrooms

 

Part D – Unmanned aircraft system specifications and documents (For each operational unmanned aircraft system)

19

Category of UAS

☐ Aeroplane     ☐ Rotorcraft    ☐ Hybrid

20

Sub-category of UAS

☐ RPAS        ☐ Model         ☐ Autonomous

21

Class of UAS

☐ Nano ☐ Micro ☐ Small ☐ Medium 

☐ Large

22

Model name

 

23

Unique identification number

 

24

Unmanned aircraft system specifications

 

Part E – Personnel details

 

25

Details of accountable manager

 

26

Details of each instructor 

 

Part F – Fee details

 

27

Transaction number

 

28

Fee receipt

 

 

DECLARATION

I hereby declare that all information provided herein are true and correct to the best of my knowledge.  I shall ensure full compliance with the training requirements specified by the Directorate General of Civil Aviation.  I understand that furnishing any false information herein shall make me liable for penal action, as applicable.

Name: 

   Date:                                                    Place: 

Previous
Next

Importent Links

Courses

Contact

  • B-196, Palam Extn., Sector 7,
    Dwarka, New Delhi – 110075
  • +91 9910338402
  • info@bbaaviation.in

Copyright © 2024. All rights reserved by Air Divit Pvt. Ltd.

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare